Meine Wiki

Seite bearbeiten und [Speichern] drücken. Siehe syntax zur Wiki-Syntax. Bitte nur editieren, falls Sie das Dokument tatsächlich verbessern können. Zum Testen bitte erst in der Testumgebung üben.

After an accident, your car’s body kit may be cracked, requiring immediate attention. Repainting it can restore its original appearance. Begin by taking off the body kit from the vehicle. Use the correct equipment and adhere to OEM guidelines to avoid snapping mounting points.

Once removed, clean the surface thoroughly using a automotive-grade cleaner to eliminate old wax. This step is critical to ensure the finish lasts longer.

Next, assess the damage for deep scratches. If you find minor imperfections, apply automotive filler to level the surface. Allow the filler to dry completely, then sand it with a sequence of abrasives starting at 80 grit and moving up to 800 grit. This creates a smooth, even surface.

After sanding, wipe the surface clean using a sticky roller to eliminate sand particles.

Mask off all areas you don’t want to paint using heat-resistant painter’s tape and painter’s paper. Ensure edges are pressed firmly to prevent bleed-through.

Before applying color, spray on a plastic-specific primer designed for composite body kits. This extends coating life. Let the primer set for 30–60 minutes, then smooth with fine abrasive using micro-fine sanding pad for a uniform matte base.

Now you’re ready to paint. Use a flexible urethane enamel. Apply light passes, allowing each coat to evaporate solvents as specified. Four to five thin layers yield far better results than a single heavy application. Use a aerosol cans held at optimal distance, moving in smooth, even strokes. Avoid holding the spray too close to prevent orange peel.

After the final color coat dries, apply a protective lacquer for protection. Apply a dual-layer system using the identical method as the color coat. Let the clear coat harden in a dust-free environment.

Once fully cured,  [[https://doc.aquilenet.fr/riukNcSCStOFiMzF2OfR7A/|auto part dubai]] machine buff with foam pad using a ceramic-grade glaze to eliminate haze.

Reattach the body kit to your vehicle using the original hardware, ensuring proper spacing. Always do a dry fit first before fully securing all fasteners.

Finally, check under multiple lights under LED shop lights to verify hue consistency. If needed, correct mismatched spots with a small artist’s brush and factory color code.

With thorough cleaning and time, a repainted body kit can blend seamlessly with the car and resist fading and cracking.

Zusammenfassung

Hinweis: Durch das Bearbeiten dieser Seite geben Sie Ihr Einverständnis, dass Ihr Inhalt unter der folgenden Lizenz veröffentlicht wird: CC Attribution-Share Alike 4.0 International